Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Hicksville: What to Know First

We provide independent Famco chimney liner and rebuild service in Hicksville, with most jobs completed in a single visit and upfront pricing agreed before we start. A typical Famco stainless steel liner replacement runs $2,800-$4,200 depending on flue height and condition, while partial rebuilds start around $3,500. We’re Hearthstone Chimney Co., and we’ve been working on Hicksville chimneys since the days when most of these houses were still heated by oil.

Call (516) 259-3797

This page is for homeowners who already know they’ve got a Famco component in their chimney system, or suspect they do, and need straight answers about whether it can be repaired, what it will cost, and who in Hicksville actually knows how to work on it. If that’s you, call (516) 259-3797. A live person answers, 24 hours a day.

How Famco Products Fail - and How We Fix Them

• Famco 304L stainless flex liners in pre-1990 Hicksville colonials. These were popular retrofits in the 1980s and early ’90s, especially in the split-levels off Old Country Road. The 304L alloy was never meant for sustained wood-burning temperatures above 1,000°F, and after three decades of Long Island winters, we see pinhole corrosion at the flex points where condensation pools. We replace with 316L or 316Ti alloy, which handles the creosote acids better, and we upsize if the original was underspec’d for the appliance.
• Famco rigid 316L liner systems with failed top-seal collars. The collar gasket hardens after about 15 years of freeze-thaw cycles. Water tracks down the annular space, rusts the top plate, and stains the exterior masonry. We don’t just swap the gasket; we pull the top assembly, inspect the liner wall for crevice corrosion hidden underneath, and reinstall with a silicone-impregnated collar rated for 600°F continuous. The chimney doesn’t care what you hoped it was - it shows you what it is.
• Famco Heat-Fab Saf-T Liner with separated seam joints. These snap-lock seams can work loose when the chimney shifts, which happens more than you’d think in Hicksville’s clay-heavy soils after wet springs. The gap looks minor but drafts flue gases into the masonry cavity. We spot-weld and sleeve, or replace the affected section if the gap has propagated. We document the before condition with camera photos so you see exactly why we’re recommending what we are.
• Famco chimney caps with corroded mesh and warped lids. The galvanized mesh on older Famco caps rusts from the inside out, especially where salt air from the south shore works its way inland. A clogged mesh forces smoke backward on windy days. We fit a stainless or copper replacement cap with 5/8-inch mesh, properly sized to the flue, not the generic big-box sizes that never seat right.
• Famco transitional connectors (stovepipe to liner) with thermal fatigue cracks. These see the worst temperature swings of any component. In Hicksville, we find them cracked in homes that burn intermittently - weekend fires, then cold all week. The expansion-contraction cycle work-hardens the metal. We replace with a heavier-gauge OEM or equivalent connector, and we check that the appliance is drafting properly so the connector isn’t seeing reverse flow.

Our Famco Chimney Liner & Rebuild Process

1. 1
   Call and schedule. A live person answers, day or night. We ask about the appliance, the symptoms, and the age of the house. If it’s urgent - smoke backing up, carbon monoxide detector activity - we prioritize.
2. 2
   Level-2 camera inspection. Our technician runs a camera the full length of the flue, records the video, and pulls stills of every defect. You see the same images we see. No verdict until the camera comes out.
3. 3
   Parts decision: OEM Famco or quality equivalent. If Famco still produces the exact component, we’ll quote it. If it’s obsolete or the lead time is unreasonable, we source from DuraFlex, HeatShield, or Gelco - brands we’ve used for years and trust for warranty-safe compatibility. We explain the trade-off and let you decide.
4. 4
   Repair or rebuild, single visit. Our techs arrive with the parts, the tools, and the materials. Most Famco liner replacements and partial rebuilds finish in one day. We pressure-test or smoke-test before we pack up.
5. 5
   Photo report and written guarantee. You get the inspection photos, a plain-English summary of what was done and why, and the 90-Day Done Right Promise in writing. If it’s not right, we make it right. No paperwork to file, no argument.
6. 6
   Cleanup and walkthrough. We leave the work area cleaner than we found it. You sign off satisfied, or we don’t consider the job done.

What Famco Chimney Liner & Rebuild Costs in Hicksville

These are real Hicksville numbers, not national averages padded for negotiation. The estimate we give is the invoice you pay. We don’t find “surprise” problems after we start - if the camera inspection missed something, that’s on us, not you. Call (516) 259-3797 for a free, no-pressure estimate.

Why Hicksville Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been on roofs in Hicksville since 1984. Russell Haines and our crew know the difference between a Famco 304L and 316L system without pulling the cap, because we’ve replaced enough of both to know where each was installed and how it ages in this climate.

Our 90-Day Done Right Promise means exactly what it says: if it’s not right, we come back and make it right, in writing, no arguing. Our technicians are background-checked, uniformed, and trained on Famco, DuraFlex, HeatShield, and Gelco systems - so if your Famco part is no longer manufactured, we have proven alternatives ready.

A live person answers our phone 24 hours a day. Most jobs complete in one visit. And every recommendation comes with photos you can see and a plain-English verdict you can understand. That’s the Keystone Standard. That’s how we’ve operated for over 42 years, and how we plan to operate for the next 30.

FAQs